Lasik

13 November 2008 | Belum ada komentar | dibaca : 842 kali | Print halaman ini | Email halaman ini ke teman | share on facebook  

Prinsip dari tindakan dengan Laser.

Excimer laser adalah alat yang mempunyai presisi yang sangat tinggi dimana digunakan untuk merubah kelengkungan kornea.

Laser juga dapat digunakan untuk mengukir sehelai rambut manusia seperti gambar disamping padahal ukuran rambut manusia sekitar 60 – 70 mikron.

Proses sederhananya sama dengan saat lab optik membuat lensa dengan merubah kelengkungan bahan lensa tersebut.

Secara bertahap dengan kecepatan tinggi laser mampu mengambil tiap 0.25 mikron jaringan kornea. Sebagai hasilnya, kekuatan power kornea akan berkurang sehingga total kelainan refraksi akan bisa dikurangi.

Apa Pengertian LASIK?

LASIK singkatan dari Laser Assisted In-situ Keratomileusis. Saat ini LASIK merupakan salah satu metode koreksi kelainan refraksi (rabun dekat, rabun jauh, silinder) yang paling populer di dunia. Dengan prosedur singkat (sekitar 10 menit/mata) dan tanpa rasa nyeri, LASIK mampu memberikan solusi optimal pada masalah penglihatan Anda.

Alasan Memilih LASIK:

1.  Bebas dari ketergantungan alat bantu penglihatan (kacamata dan kontak lensa)
2. Tajam penglihatan lebih baik
3. Faktor kenyamanan
4. Kualitas hidup lebih baik
5. Hasil yang akurat dan optimal
6. Prosedur yang cepat, mudah dan tidak menyakitkan
7. Memaksimalkan aktivitas berolahraga
8. Keuntungan jauh lebih besar dari resikonya
9. Faktor penampilan yang lebih baik

Tahapan LASIK:

LASIK merupakan tindakan operasi tanpa harus rawat inap. Pasien hanya memerlukan anestesi topical (tetes mata) selama operasi, tanpa merasakan sakit/nyeri. Waktu yang dibutuhkan untuk kedua mata sekitar 20 menit dan saat lasernya bekerja memerlukan waktu sekitar 20 detik/mata.

Tahap 1
Membuat flap (lapisan) pada kornea dengan menggunakan mikrokeratom

Tahap 2
Setelah flap dibuka, mesin laser langsung bekerja pada kornea mata. Sebagian flap masih menempel pada kornea.

Tahap 3
Setelah tindakan laser, flap akan dikembalikan pada posisi semula dan akan melekat erat tanpa perlu penjahitan.

(Text Description Follows Below.)

The illustration shows the left eye at an angle with the corneal flap laid open. A smaller frame shows the eye in cross section with the eye cut in half from front to back in the horizontal plane and you were looking at the inside. The illustration also shows a laser beam in the center of the eye removing corneal tissue.

The first frame of the animation shows the eye at an angle with the speculum holding the eyelids open. Next, the illustration shows where the incision will be made to create the round corneal flap. The next frame shows the suction ring of the microkeratome being placed on top of the eye encircling the cornea.

The eye with the suction ring in place is then shown in cross section with the eye cut in half from front to back in the horizontal plane. The suction ring is also cut in half. The next frame shows the microkeratome head sliding into place over the cornea slightly flattening it. The animation shows the microkeratome blade making a thin slice in the cornea creating the flap as the microkeratome head continues to move forward. The microkeratome head then slides back into its original position.

The next frame illustrates the corneal flap being lifted and folded back over on its hinge.

The next illustration shows the eye at an angle with the corneal flap laid open. In a smaller frame, there is a cross section of the eye with the eye cut in half from front to back in the horizontal plane. The next frame depicts a laser beam reshaping the cornea by removing corneal tissue. The final frame shows the corneal flap being laid back into position.
PS: source:FDA

Komentar/Saran/Kritik/Pertanyaan Anda...

Halaman ini tidak ada fasilitas komentar, saran, kritik ataupun pertanyaan. Silakan di konsultasi online atau sesuai topik/artikel.

Switch to our mobile site